Tapo P110M US: Energy Monitoring for Desks and TVs
The US Tapo P110M is a conditional fit for desk and TV energy monitoring: TP-Link documents consumption tracking, rate-based estimates and Matter setup, but energy support depends on firmware and the receiving app. Choose the four-pack if you have several useful monitoring locations and a 2.4 GHz Wi-Fi network; skip it if you require Thread or identical energy features in every Matter app.
Quick answer: Buy the US Tapo P110M four-pack if you want several plug-level energy-monitoring locations, have 2.4 GHz Wi-Fi, and your devices meet TP-Link’s load-type limits. Match energy features to your app and firmware. Tapo is the straightforward route to the documented energy dashboard; Matter on/off compatibility does not establish energy-display support in your chosen app. Skip it if you need Thread or expect every Matter app to show the same energy dashboard; this guide is based on documents, not a purchased or tested unit.
SellPix Social earns a commission from qualifying purchases made through links marked “Paid link”, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
On this page
Quick answer: Buy the US Tapo P110M four-pack if you want several plug-level energy-monitoring locations, have 2.4 GHz Wi-Fi, and your devices meet TP-Link’s load-type limits. Match energy features to your app and firmware. Tapo is the straightforward route to the documented energy dashboard; Matter on/off compatibility does not establish energy-display support in your chosen app. Skip it if you need Thread or expect every Matter app to show the same energy dashboard; this guide is based on documents, not a purchased or tested unit.

Where to buy
- For desk and TV energy monitoringTP-Link Tapo P110MSee the TP-Link Tapo P110M (US plug, white, 4-pack) on AmazonPaid link
Who it suits—and who should skip it
The Tapo P110M suits readers looking for app-based monitoring of connected equipment. TP-Link says it tracks connected devices’ energy use and accepts an electricity rate for bill estimates. Its US package listing includes four plugs and a Quick Start Guide. TP-Link US
Choose this bundle if you want multiple monitoring locations across your desk and entertainment setup. Skip the four-pack if you need only a single monitoring point. For setup, TP-Link documents Bluetooth onboarding through Tapo or scanning the included code with a Matter-compatible app, including Alexa, Google Home and Apple Home. The guide cautions that Tapo features can vary by model and software version, and availability can vary by region. Product page · Guide
Skip it for outdoor use: the guide specifies indoor use only. TP-Link lists ETL safety certification, flame-retardant construction and overload protection. For complete power disconnection, TP-Link instructs users to unplug the connected appliance from the smart socket. It also tells users not to open, repair or alter the plug. Product page · Guide
For physical fit, TP-Link lists about 2.60 × 1.50 × 1.57 in (66 × 38 × 40 mm), H × W × D. It describes the compact design as intended to avoid blocking adjacent sockets; that is the manufacturer’s design claim. TP-Link US
Key choices: setup, energy estimates and app conditions
TP-Link’s US ecosystem matrix, dated January 27, 2026 and checked for this guide on November 11, lists energy monitoring in Tapo/Kasa and conditionally in SmartThings. It does not list that feature in Alexa, Google or Apple. This is the maker’s published matrix, not our compatibility test or a guarantee that platform support has stayed unchanged. Keep firmware current and recheck the linked matrix before choosing an app. For SmartThings energy monitoring, the matrix specifically calls for resetting the plug, then following its linked FAQ to start the Energy function. Read that procedure before changing an existing setup.
TP-Link Tapo P110M: For multiple app-based monitoring locations
Who it's for: Readers considering the US four-plug bundle for connected-device energy monitoring. TP-Link documents energy tracking and electricity-rate entry for bill estimates, alongside setup through Tapo or a Matter-compatible app. TP-Link US
| Choice | What TP-Link documents | Buying implication |
|---|---|---|
| Tapo onboarding | Bluetooth-assisted setup in Tapo | Choose Tapo for the documented Bluetooth onboarding route. |
| Matter onboarding | Code-based setup in compatible apps, including Alexa, Google Home and Apple Home | These are TP-Link’s examples of compatible setup apps. |
| Rate-based estimates | Electricity-rate entry, with singular and periodic billing options | Enter your electricity rate for bill estimates. |
| Matter energy data | TP-Link’s US V1.6 notes add Matter 1.3 energy tracking and warn that receiving apps differ | Update the plug and check the functions supported by your controller; Matter on/off control alone does not establish energy support. |
| Current and voltage | A support-page update note adds real-time current and voltage to the device page | Tapo features may vary by model and software version. |
| Internet outage | Connected devices on the household LAN remain accessible through Tapo | Tapo access is documented for devices on that local network during an outage. |
Sources: US product page, support page and guide.
For setup across multiple apps, the guide gives a specific code-handling condition: the original Matter code can be used for setup in one app, and reused after a device reset. For subsequent apps, generate a new code using the first app. Installation and User Guide
Care and setup records
Keep the Matter code and quick-start guide. Use the plug indoors within TP-Link’s specified 32–104°F (0–40°C) operating range, keep it away from heat and moisture, and follow its load categories. TP-Link’s guide calls for dry-cloth cleaning and unplugging a device that emits smoke, unusual odor or abnormal noise. App-off is not a substitute for unplugging equipment before servicing.
Check the US load rating before buying
TP-Link rates the US P110M at 15 A/1800 W for general-use or resistive loads and 1/6 HP for motors in its US specification. That general wattage is not the limit to apply to every desk or TV device. TP-Link's load-type guide, US → Tapo P110M, lists these more specific maximum power figures at 120V:
| Connected equipment | TP-Link's listed maximum power |
|---|---|
| TV | 350W |
| PC | 600W |
| Desk lamp | 80W |
| Power adapter / USB charger | 200W, subject to the inrush-current warning below |
A charger can be a poor fit even far below 1800W. TP-Link specifically warns that using 60–75W power adapters or USB chargers may damage the device because of inrush current. Do not buy the four-pack for those chargers on the assumption that a low wattage alone makes them suitable. Use the manufacturer's category-specific guidance for the exact equipment you intend to monitor.
The plug uses 2.4 GHz Wi-Fi, not Thread. Network compatibility and electrical load suitability are separate checks.
The Tapo-app setup route in the user guide uses a TP-Link ID. A Matter-app setup route has its own controller requirements. Check the exact ecosystem and energy function you plan to use instead of treating a Matter logo as a promise that every app shows the same energy dashboard.
Is standby monitoring enough reason for a four-pack?
Use the scale of the job to challenge the purchase. As a hypothetical example, a steady 1 W load for 24 hours a day over 30 days uses 1 W × 24 h × 30 days ÷ 1000 = 0.72 kWh. This is arithmetic using an assumed load, not a P110M measurement or a savings claim. If tiny standby readings are the main goal, look for a published measurement-accuracy specification; a display resolution is not the same thing as accuracy. This guide contains no low-load accuracy test. Several useful monitoring locations are a stronger reason to consider the four-pack than an untested promise that it pays for itself.
Practical pros and cons
Pros
- Several deliberate monitoring locations: The documented four-unit bundle suits a desk-and-TV plan better than an undefined desire to monitor “everything.”
- Two onboarding routes: TP-Link offers Tapo Bluetooth setup and Matter-code setup, letting the reader start with the intended control app.
- A documented path beyond switching: Rate-based estimates and supported Matter energy reporting make this a candidate for readers who want information as well as on/off control.
- A specific offline-access commitment: TP-Link says Tapo access continues over the LAN when household internet connectivity is lost.
Cons
- Compatibility has layers: Hardware, firmware and receiving-app support all matter to the energy experience.
- Load limits depend on the device: PC, TV and charger categories have tighter conditions than the general rating; TP-Link warns that 60–75W adapters/USB chargers may cause inrush-current damage.
- Network choice is fixed: The specified 2.4 GHz Wi-Fi connection makes this the wrong choice for a Thread requirement.
- Four units need four useful jobs: A single-location buyer should question the bundle before choosing it.
- Compact dimensions do not settle adapter fit: TP-Link's adjacent-socket claim still needs to be considered against the actual arrangement.
Alternatives: choose the job before the bundle
Keep your existing controls if you only need on/off switching. Consider a smaller P110M pack if you have one monitoring location. If you require Thread, choose a device explicitly documented for Thread rather than assuming Matter means Thread. If your existing smart-home app must display energy data, confirm that exact function before purchase. These are task-based choices, not measured rankings of competing products.
If the load and app requirements fit, check the US Tapo P110M white four-pack on Amazon.com (Paid link).
FAQ
Can I add the plug to a second Matter app?
Yes. TP-Link's guide says the original Matter code is for initial setup in one app. To add another app, generate a fresh sharing code from the first app; resetting the device makes its original code reusable. This multi-app setup instruction does not remove the separate energy-support conditions described above.
Is the 1800W rating enough to choose it for a PC or charger?
No. TP-Link lists 600W for PCs and 350W for TVs in its US P110M load-type table. Its charger guidance warns that 60–75W adapters/USB chargers may cause inrush-current damage. Match the equipment category, not just the plug’s general watt ceiling.
How we researched
This guide uses TP-Link's US P110M product specifications, the captured P110M V1.60 support material containing US V1.6 firmware notes, the P110M installation and user guide, and the US P110M load-type table, rechecked on November 11, 2026. No unit was purchased or tested. We did not measure energy accuracy, standby consumption, outlet clearance, protection response or connectivity. Recommendations are conditional editorial judgments based on the documented features and limits; they do not promise lower consumption.