Bluetooth Multipoint on soundcore Q20i: Phone and Laptop Setup
Pause laptop playback before adding a phone to your soundcore Q20i connection. This guide explains that pairing requirement, separates Windows audio-output problems from connection problems, and covers the wired-mode limitations.
Quick answer: To set up Bluetooth multipoint, connect the laptop first and pause its audio. Double-press the Q20i multifunction button, then choose the headphones in your phone’s Bluetooth list. Keep the setup wireless, because the Q20i manual explains that connecting AUX turns Bluetooth off. We did not purchase or test this product.
SellPix Social earns a commission from qualifying purchases made through links marked “Paid link”, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
On this page
Quick answer: To set up Bluetooth multipoint, connect the laptop first and pause its audio. Double-press the Q20i multifunction button, then choose the headphones in your phone’s Bluetooth list. Keep the setup wireless, because the Q20i manual explains that connecting AUX turns Bluetooth off. We did not purchase or test this product.

Where to buy
- soundcore Q20i A3004 Hybrid Active Noise Cancelling Headphones, BlackSee on AmazonPaid link
Set up Bluetooth multipoint on the Q20i
This walkthrough is for soundcore Q20i, with a Bluetooth laptop as the first device and a phone as the second. Soundcore’s US product page describes laptop-to-phone switching and makes first-device inactivity a condition of adding another connection.
Have these ready:
- Your Q20i headphones and the laptop you use for music.
- Your phone, unlocked.
- A way to pause every audio source currently playing on the laptop.
- A wireless connection rather than an AUX cable.
We recommend treating this as a switching workflow: start with one listening device, stop its playback while setting up the other, and then check the connection state. If your priority is a wired laptop connection, use the AUX guidance below instead of following the Bluetooth setup.
Prepare the laptop, then find Q20i on your phone
Soundcore’s US Q20i instructions provide the initial pairing controls and the requirement to stop first-device audio. Apple’s iPhone guidance and Google’s Android guidance provide the phone-side Bluetooth actions.
- Establish the laptop connection first. Start with the headphones connected to the laptop. Play a short clip to confirm the laptop is using the headphones, then pause it.
- Pause laptop playback before adding the phone. Stop the music player and any other playing audio. With only the laptop connected, double-press the multifunction button on the headphones. Alternatively, open Dual Connections in the soundcore app and choose Connect New Device.
- Open the phone’s Bluetooth device list. On an iPhone, open Settings, then Bluetooth, and enable it. On Android, open Bluetooth settings and choose the option to pair a new device; menu wording can vary. Select soundcore Q20i when it is available to pair. On Android, check that its status changes to Connected.
- Check laptop output separately if the connection is present but music is silent. Microsoft’s Windows guidance directs you to Settings → System → Sound, where you can choose the Bluetooth headphones under Output. Return to the music player and start playback after checking that selection.
When to stop: if the phone cannot find Q20i, stop repeating phone-side selection and first check that laptop audio has actually stopped. If Windows already shows the headphones connected, move to the output checks below rather than treating silence alone as a pairing failure.
Why won't my soundcore Q20i pair with a second device?
For second-device pairing, soundcore’s requirement is that the first device be inactive. If the headphones receive sound input from that device, they will not enter pairing mode. For a connected Windows device with no sound, Microsoft’s guidance includes checking the selected Bluetooth audio output.
The table uses soundcore’s US Q20i guidance, the Q20i manual, and Microsoft’s Windows Bluetooth troubleshooting instructions.
| What you see | What to try next | What the result tells you |
|---|---|---|
| The phone shows no headphones while a laptop video plays | Pause the video and any other laptop audio, then double-press the headset button | Look for a pairing prompt before searching again on the phone. Turning down the volume leaves the player running. |
| Windows lists the headphones but sound comes from the speakers | Play a familiar clip and choose Q20i as Output in the Windows Sound panel | If the clip moves to the headphones, leave pairing alone. The previous output selection caused the silence. |
| The phone used to work but neither source can reach the headphones | Unplug the AUX cable. Try one Bluetooth source, then add the other | This isolates a wired connection or an old device entry before resetting anything. |
| The headphone play button starts the wrong player | Pause playback from its own app and start the desired source on the other device | The model FAQ says the play/pause button responds to the most recently active device. |
Take a phone call while the laptop stays connected
When laptop music is playing, a single press answers a phone call. A second incoming call during a conversation is different. The model FAQ gives conflicting outcomes for a single press: one section says the current call ends, another says it stays on hold. Its multiparty controls also differ from the general reject-call timing in the manual. For an interview, silence or disconnect the phone before you join. For two live calls, handle the waiting call on its screen so you can see which conversation is active.
Which setup fits your workday?
| Workday | Our choice | Trade-off |
|---|---|---|
| Music on the computer, occasional phone calls | Keep the laptop and phone connected. Use the headset button or the app’s Connect New Device command when adding the second device. Start playback on the device you want to hear. | Saves reconnecting the headphones each time a call arrives. The model FAQ says the first device resumes music after the call ends. |
| Interview, class or presentation that must run uninterrupted | Temporarily disconnect the phone from the headphones | Loses the phone handoff for that session. The call stays on the computer you selected. |
| A fixed desk with a meeting app open all day | Pick a wired USB headset with a microphone and select it for input and output in the app | A cable limits movement, but the meeting has one predictable audio path. The Q20i AUX cable is for listening, so it cannot substitute for that microphone. |
Should you buy for this feature? If your laptop plays music and your phone takes calls, the Q20i saves the repeated trip through Bluetooth settings. You still have to pause the first device during pairing, and two conversations require attention to the active call. If your current soundcore Life Q30 already connects to both devices, keep it: its own pairing FAQ documents the same two-device use case. Buying another headset solely to get multipoint adds little there.
If your priority is a physical mute switch at one computer, a wired design solves a different problem. The Logitech H390 USB-A puts mute on the cable and uses a boom mic. Look at what ends your call or mutes your microphone before choosing between the two setups.
For a busy shared office, check how clearly a colleague can hear you from your own desk before choosing a headset. We have no recording of this model in your room; the product FAQ notes that background sound can reach its microphone.
FAQ
Does soundcore Q20i multipoint work with AUX?
No. The Q20i manual explains that wired listening switches Bluetooth off, so AUX cannot provide the laptop side of this Bluetooth switching setup. Use Bluetooth for the laptop and phone if that is the workflow you want.
Can I use the AUX cable for phone calls?
The Q20i AUX-in instructions say the supplied cable has no microphone. For a call, select the microphone built into the connected phone or laptop. The same AUX-in FAQ lists noise cancellation as unavailable in wired mode. The Wired Listening section of the Q20i manual describes the Bluetooth cutover.
How we checked the Q20i instructions
We compared four states separately: adding the second device, answering a phone call over laptop music, handling two calls, and plugging in AUX. For the button layout and wired limits, we used the Q20i section of the shared manual. For calls we compared both multipoint answers in the model FAQ. Where they disagree, we recommend using the phone screen during an important call. The Windows output check is a separate test that a reader can repeat with a familiar clip. We reviewed documentation and did not test a headset or measure its microphone.
For fit and listening features, see our soundcore Q20i buying guide. If the other source is a living-room TV, our Fire TV Stick comparison lists streaming devices with Bluetooth for private listening.
Sources
- soundcore Q20i Wireless Hybrid ANC Headphones - soundcore US
- Soundcore
- 000022716.pdf
- Fix Bluetooth connected but no sound issue on Windows | Microsoft Support
- Connect a third-party Bluetooth accessory to your iPhone or iPad - Apple Support
- Find & set up Bluetooth devices near your Android device - Android Help