How to Remove Bobbles from Jumpers: Philips GC026 Fabric Shaver Guide
Lay it flat, use the cap and never press: how to de-bobble jumpers with the Philips GC026 fabric shaver, which knits need a comb instead, cleaning it, mistakes that cause holes and how washing affects bobbling.
Quick answer: To remove bobbles without damaging a jumper, lay it flat, smooth it out and glide a fabric shaver over the bobbly patches with almost no pressure, keeping well away from embroidery, buttons, zips and loose threads. The Philips fabric shaver sold on Amazon UK as ASIN B00E3862DE is model GC026/00, a simple 2 × AA battery de-bobbler that suits everyday wool, cotton and synthetic knits. For cashmere or loose, open knits, start with your fingers or a de-pilling comb instead.
SellPix Social earns a commission from qualifying purchases made through links marked “Ad · Paid link”, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
On this page
Quick answer: To remove bobbles without damaging a jumper, lay it flat, smooth it out and glide a fabric shaver over the bobbly patches with almost no pressure, keeping well away from embroidery, buttons, zips and loose threads. The Philips fabric shaver sold on Amazon UK as ASIN B00E3862DE is model GC026/00, a simple 2 × AA battery de-bobbler that suits everyday wool, cotton and synthetic knits. For cashmere or loose, open knits, start with your fingers or a de-pilling comb instead.

Pictured: Philips GC026 fabric shaver. Manufacturer's product image, not our photograph or test. Other models discussed in this article are not pictured.
This is a research-based guide; we have not purchased or physically tested the GC026. Product facts come from Philips' product page, leaflet and manuals and the Amazon UK listing; fabric-care advice from The Woolmark Company, Johnstons of Elgin and Unilever's Cleanipedia, all checked on 12 October 2026.

Original SellPix Social editorial graphic, not a product photo. Steps follow the Philips GC026 manual; fabric advice from Woolmark and Johnstons of Elgin, checked 12 October 2026.
Is the Philips fabric shaver worth it? Who it suits, and who should skip it
Philips describes the GC026/00 as a fabric shaver "suitable for all garments", from jumpers to blankets, with blades that rotate at up to 8,800 rounds per minute, a mesh with three hole sizes and a removable pill container (Philips GC026/00 leaflet). The Woolmark Company, the wool industry's care authority, calls battery-operated "de-pillers" or "fabric shavers" low cost and very effective at removing pills (Woolmark pilling factsheet).
Our reading: it is worth having if several everyday knits, fleeces or throws bobble under the arms and along the sides.
It suits you if:
- Your bobbles are on medium-weight, tightly knitted wool, cotton or synthetic jumpers.
- You want something simple: one on/off slider, one clip-on cap, nothing to charge (two AA batteries are included, per Philips).
Skip it, or buy something else, if:
- Most of your knitwear is cashmere. Johnstons of Elgin, a Scottish cashmere mill, advises its de-pilling comb or removing pills gently by hand (Johnstons of Elgin care guide).
- Your favourite jumpers are loose, open or chunky hand-knits. Our judgement: long floats and open loops are exactly what a rotating blade can catch, so pick those bobbles off by hand.
- You want a rechargeable or more powerful model. The GC026 runs only on AA batteries. Philips also makes rechargeable models such as the GC028 (see Alternatives).
- You want to de-bobble a sofa. The Amazon UK listing mentions upholstery, but Philips' important-information leaflet says the appliance is intended for garments only.
- Your problem is hair, dust or fluff rather than bobbles. A lint roller is the better tool.
See the Philips GC026 fabric shaver on Amazon UK (Ad · Paid link)
What you are buying: the GC026/00 at a glance
The Amazon UK page names the model as GC026/00. Other codes such as GC026/30 share the same AA power, blade speed and cap (Philips GC026/30 leaflet); check the code on the box if colour matters.
| Detail | What the source says | Source |
|---|---|---|
| Model | GC026/00 (Philips also calls it the "500 Series Fabric Shaver") | Philips product page |
| Power | 2 × AA batteries, included; not rechargeable | Philips leaflet; important information |
| Blade speed | Up to 8,800 rounds/min | Philips leaflet |
| Blades | 3 blades | Amazon UK title only; Philips' own documents do not give a blade count |
| Shaving head | Mesh with 3 hole sizes; "large blade surface" | Philips leaflet |
| Height setting | One clip-on "height adjustment cap", also listed as a "delicate fabric protector"; no multiple positions described | Philips leaflet and product page |
| Lint container | Large, removable, for emptying shaved pills | Philips leaflet |
| In the box | Shaver, cleaning brush, delicate fabric protector, 2 Philips AA batteries | Amazon UK listing; Philips leaflet |
| Size | 12.3 × 5.8 × 8 cm (W × H × D) | Philips leaflet (2023) |
How to remove bobbles step by step
These steps follow the GC026 user manual (Philips GC026 manual, PDF); where we add our own advice, we say so.
- Fit the batteries. Remove the battery cover and insert two AA alkaline batteries, matching + and −. Philips says not to mix old and new batteries or different types.
- Lay the garment flat. Philips' instruction is to smooth the garment out on a flat surface. Our advice: use a table, and never do it while wearing the jumper.
- Decide on the cap. The manual says to remove the protective cover for garments with short pills and attach it for garments with long pills. On a delicate or fluffy knit, start with it on.
- Test a hidden patch (our suggestion, not Philips'). Try the inside of a hem first.
- Switch on and glide. Slide the switch up, place the shaver on the fabric and move it gently across the bobbled area. Philips' manual says not to press the appliance onto the garment too hard. Our advice: let the head rest on the fabric and stop once the surface is smooth.
- Switch off and remove the batteries, as the manual instructs, before you empty or clean it.
Which fabrics need extra care
Philips' manual does not single out wool, cashmere or loose knits, so this table combines its instructions with textile-care guidance and our own judgement.
| Fabric or knit | Suggested approach | Why |
|---|---|---|
| Everyday wool, cotton, acrylic or polyester knit | Shaver, cap off for small pills, light pressure | The use Philips designs it for |
| Fluffy or brushed knit (mohair-style, brushed acrylic) | Shaver with the cap on, or a comb | Philips: cap on for long pills; our reading is that it keeps the blade further from the pile |
| Cashmere and very fine merino | Fingers or a de-pilling comb first | Johnstons of Elgin advises its comb or detaching pills by hand; Woolmark says a comb should be used "very gently and carefully" |
| Loose, open or chunky hand-knits | Pick off by hand | Our judgement: loops and floats can be drawn into the mesh |
| Embroidery, sequins, appliqué, cuffs with loose threads | Do not use the shaver | Philips manual: no embroideries, zips, buttons or loose threads |
Mistakes that cause holes
- Pressing down. The manual warns against pressing too hard. Our reading: pressure pushes the knit into the mesh, where the blade can cut yarn as well as pills.
- Working on a fold or seam. Our reading: a ridge takes the full cut. Smooth the garment flat first, as Philips instructs.
- Using a damaged shaver. Philips says not to use it if the blade unit or guard is broken.
- Letting the container clog. The manual's troubleshooting names pills accumulated inside as the reason the appliance stops removing pills.
Emptying and cleaning
Per the manual, with the shaver switched off and batteries out:
- Slide the front cover down and pour the lint into a bin.
- Turn the lid anticlockwise to unscrew and remove it.
- Without touching the blades, gently pull them up and out.
- Brush the blades and the inner lid with the supplied brush.
- Refit the blades, still without touching the cutting edges, and screw the lid back on clockwise.
Philips also says never to immerse it in water and to remove the batteries for long storage. Its guarantee excludes blade-unit wear. Recycle the shaver and spent batteries at electrical and battery collection points.
Why jumpers bobble, and how washing affects it
Woolmark says pilling is caused by rubbing during wear, usually at the elbows, armpits, sleeves, belly and sides, where the arms rub against the body (Woolmark: pilling). More activity and abrasive surfaces such as desk chairs raise the risk, it says, and no method can guarantee a garment will never pill. Johnstons of Elgin says pills may form after the first few wears of cashmere, as loose fibres tangle where the garment rubs.
Washing is a second source of friction. For wool, Woolmark advises turning garments inside out before washing and avoiding fabric softener. Its washing guide recommends the machine's wool setting ("usually gentle action at 40°C") or a hand wash at about 30°C, and drying flat (Woolmark: how to wash wool). Johnstons advises washing cashmere without rubbing or wringing, drying it flat and not tumble drying.
For mixed loads, Unilever's Cleanipedia suggests separating fabrics, not overloading the drum, a short, delicate cycle for jumpers, and liquid detergent, because powder can rub against clothes as it dissolves (Cleanipedia). Its advice to use a mild fabric conditioner conflicts with Woolmark's advice for wool; for wool, we would follow Woolmark.
Alternatives: comb, fabric razor or lint roller?
| Tool | What it is for | Limits |
|---|---|---|
| Your fingers | A few pills on fine knits; Woolmark suggests doing it routinely after drying or before ironing | Slow on a whole jumper; pull gently rather than tugging |
| Cashmere or de-pilling comb | Cashmere and fine wool; the method Johnstons of Elgin recommends | Woolmark: use it very gently and carefully; slower than a shaver |
| Manual fabric razor or de-fuzzer | Shaving sturdy knits, coats and upholstery without batteries | Our judgement: an exposed edge gives less margin for error than a meshed electric head; keep it off fine knits |
| Lint roller or tape | Surface lint, hair and dust | Lifts loose fibre only; it will not cut attached bobbles |
| Rechargeable fabric shaver (e.g. Philips GC028) | Frequent use or big jobs such as throws | Larger and needs charging (Philips GC028 leaflet) |
Check the Philips GC026/00 on Amazon UK (Ad · Paid link)
FAQ
Will a fabric shaver make holes in my jumper?
It can if you press down, shave over a fold or seam, or use it on loose knits. Work flat with light pressure, as Philips instructs, and try a hidden patch first.
Can I use the Philips GC026 on cashmere?
Philips says the cap is for "the most delicate garments", but Johnstons of Elgin recommends a comb or fingers for cashmere. Our suggestion: comb first; if you use the shaver, keep the cap on.
Is the GC026 rechargeable?
No. Philips lists 2 × AA batteries (included). For a rechargeable model, look at Philips' GC028 or similar.
How do I stop bobbles coming back?
You can only reduce it: wash wool inside out on a gentle wool cycle, skip fabric softener, dry flat and limit rubbing (Woolmark).
Method and sources
- Philips GC026/00 product page (philips.ie): model, 8,800 rounds/min, mesh, cap, container (the UK model URL redirected to a category page).
- Philips GC026/00 leaflet (2023): AA power, accessories, dimensions.
- Philips GC026/30 leaflet: shared specs on another code.
- Philips GC026 user manual, linked from the Philips GC026/00 support page: use, cap, no-go areas, cleaning, troubleshooting.
- Philips important information leaflet, fabric shaver: batteries, damage, water, guarantee.
- Philips GC028/70 leaflet: rechargeable alternative.
- The Woolmark Company: pilling and pilling factsheet: causes, prevention, removal methods.
- The Woolmark Company: how to wash wool: wash temperatures, drying.
- Johnstons of Elgin: caring for fine fibres: cashmere pilling and care.
- Cleanipedia (Unilever): how to stop clothes bobbling: laundry habits.
- Amazon UK listing, ASIN B00E3862DE (linked above): title, "3 Blades", model, box contents.
Prices, stock, ratings and reviews are deliberately left out.